• The horizontal knife of the sealing part adopts vertical drive, and the vertical knife adopts the international advanced constant temperature side sealing knife, and the sealing line is straight and firm.
• It can ensure that the sealing and tangent line is in the middle of the product, and can be continuously sealed and cut to achieve a perfect sealing effect;
• The constant temperature heating sealing and cutting system can be used to seal and cut various industrial standard shrink films such as POF. Products with different packaging specifications can be completed only by adjusting the hand wheel, which increases reliability and is easier to operate;
• The longitudinal sealing knife can do the sealing and cutting action sustainably, and the product length is not limited;
• This machine adopts advanced PLC programmable controller, with safety protection and alarm devices, and the sealing and cutting system can continuously and smoothly perform sealing action without replacement, and the maintenance operation is very simple;
• The feeding length control is combined with electric eye detection and timer to precisely control the length of the film, making the shrinkage effect easier to control;
• A total of two sets of electric eyes, horizontal and vertical, are installed, which is convenient for switching and selection. For thin or small packages, the sealing and packaging operation can also be easily completed;
• The waste is automatically coiled, controlled by a separate motor, and it will not be too loose or too tight to be pulled and cracked, and the waste is easy to disassemble;
• According to customer needs, vacuum feeding and restart functions can be added to make shrinking products more beautiful;
• The front-end power feeding line and the rear-end unpowered storage table can be selected as required;
• Photo frames, picture frames, aluminum profiles, wood products and other products are packaged individually or in combination, suitable for mass production of long materials.
• SF-5030LG adopts the tightly selected lower air transport technology to make full use of thermal energy, improve energy efficiency and save electricity. The air volume is controlled by the frequency converter; at the same time, the wind direction in the furnace and the air volume at the bottom can be adjusted according to the needs;
• The furnace cavity has a visual window, which can observe the heat shrinkage process of the product in the furnace cavity, and the upper part of the furnace cavity can be opened for easy cleaning and maintenance;
• According to customer's products and requirements, belt feeding or finger-push feeding conveyor line can be selected;
• The speed of the conveyor line can be adjusted arbitrarily, and the gap between the products can be controlled to ensure that the distance between the products is neat and consistent during sealing and cutting;
• Suitable for mass production of CDs, photo frames, books, magazines, electronic products, etc.

schematic paper